Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Door Installation Across Long Beach
Door installation in Long Beach runs $850 – $4,200 for most projects, with front entry doors in pre-1980 bungalows typically landing between $1,200 and $2,800 depending on the jamb condition and hardware. We’re the local Lightwell Windows & Doors team, and we’ve measured, ordered, and hung doors from Bluff Park to Los Altos. Call (562) 912-3327 for a written, line-item estimate before you decide anything.
Key Takeaways for Long Beach Homeowners
- Front door replacement in Long Beach averages $1,200 – $2,800 installed on pre-1980 homes; custom historic-district work runs higher.
- Homes in designated historic districts like Bluff Park and Belmont Heights need Cultural Heritage Commission approval for street-visible door changes.
- Marine air near Naples and Alamitos Bay corrodes uncoated steel hardware within two seasons – we specify stainless or brass there as standard.
- Lead times on custom millwork, not labor hours, set your schedule. We fix the price in writing before anything is ordered.
Styles & brands we work with
Why Lightwell Windows Long Beach Is Long Beach’s Preferred Door Installation Company
We carry a curated lineup of eight manufacturer brands, including Therma-Tru, Mr-Glass, and PGT, so the door we recommend fits your home and the marine air it lives in, not whichever vendor gives us the best margin. Every job is covered by the 365-Day Done Right Promise: if the finished work is not right, we make it right. No debate, no countdown.
Keith Yamada leads our Long Beach crews. We’re part of the Cedarwell network, operating to the Cedarwell Care Promise since 2010. Dispatch and scheduling are coordinated from the brand’s Los Angeles office; our crews serve Long Beach locally. You can read more about our full service area on our Long Beach page.
Long Beach homeowners have told us what they’re tired of: crews that leave dust in the hallway, techs who move furniture without asking, and invoices that don’t match the quote. So our techs are background-checked and uniformed, they wear shoe covers and lay drop cloths on every visit, and they follow the C.A.R.E. values on every job: Clean up like it’s our own home; Ask before we move or touch anything; Respect your family’s time and quiet hours; Explain the price before the work.
Front Door Replacement in Long Beach
Front Door Replacement in Long Beach means matching a new door to an opening that may have been framed in 1926, not 2006. Many of the Craftsman bungalows in Belmont Heights, Rose Park, and California Heights have non-standard rough openings, and a standard 36-inch prehung door won’t fit without the kind of shimming that eventually compromises the weather seal against the marine layer. We measure the jamb, not just the slab, before we spec anything.
You’ll know it’s time when the door no longer closes square, daylight shows at the latch side, or the bottom rail has swollen enough that it drags on the sill. In Long Beach, moisture is the usual culprit: years of coastal humidity working the original wood.
Cost of a Front Door in Long Beach
A straightforward front door replacement with a standard slab in a newer tract home runs $1,200 – $1,800. On older homes with non-standard jambs, a jamb rebuild and custom door from Therma-Tru or Mr-Glass typical runs $2,000 – $2,800. In historic districts, which we’ll cover in a moment, the range climbs to $2,800 – $4,200 because of approval timelines and reclaimed lumber.
What Your Quote Includes
Every quote is written and line-itemed before we order anything. It states the door, the jamb work, the hardware, the weather seal, and the cleanup. You’ll see the same number at the end of the job. That’s the rule, not the exception.
Door Replacement in Long Beach
Door Replacement in Long Beach covers more than the front entry. We replace back doors, side doors, French doors, storm doors, and interior doors where they’ve been damaged by humidity or hard use. The common thread on most Long Beach homes is the hardware age: original hinges and strike plates that have quietly rusted out along the coast.
Replacing an interior or rear door costs between $850 and $1,600 for standard-size openings with new jambs and hardware. The key on older homes is checking the header and the king studs before assuming the opening is square; we often find settlement that no one noticed because the old door was cut to fit the rack.
Storm and Exterior Doors
A storm door in a Long Beach bungalow is a moisture control tool as much as a security feature. We size it after we’ve verified the existing jamb is sound, because a storm door adds weight to the frame. Most exterior door work in Long Beach is standard-size replacement, but we always check for hidden rot behind the threshold.
French and Double Doors
French door replacement in Long Beach homes often means correcting for the fact that the two slabs have sagged out of alignment. New hinges, a re-shimmed jamb, and a stainless sweep bring it back. Cost runs $1,800 – $3,200, including new weatherstripping gaskets sized for marine moisture.
Trusted Brands We Service in Long Beach
We work with Mr-Glass, Therma-Tru, ViewLux, and PGT, and we keep common parts and hardware in local stock so a Long Beach replacement isn’t waiting on a freight truck from Dallas. For homeowners interested in matching window upgrades, we also offer Long Beach Eco Window Systems service as part of our full exterior solutions. Therma-Tru fiberglass doors handle the humidity especially well; PGT is our go-to when a homeowner asks about impact-rated options. You’ll get a brand recommendation tied to your specific opening and your street’s exposure, never a sales pitch toward whatever we have overstocked.
Common Door Installation Problems We See in Long Beach Homes
- Non-standard jambs in pre-1980 bungalows. The rough opening in a 1920s Craftsman is rarely the same as a modern rough opening. Forcing a standard door into it with shims is how you get drafts and water intrusion. We build the jamb to the opening, not the opening to the door.
- Uncoated steel hinges and plates near the beach. In Naples and on the Peninsula, salt air visibly corrodes bare steel hardware within two seasons. We spec stainless steel or brass on anything within a mile of the water. It costs more upfront and replaces nothing later.
- Skipping Cultural Heritage Commission approval. In designated historic districts like Bluff Park and Belmont Heights, a door visible from the street needs approval before work begins. We coordinate that submittal for you. The board meets on a schedule, and missing a deadline can stall a project for months.
- Aluminum door slab on a wood frame. Older aluminum doors in Long Beach rot the surrounding wood frame where condensation collects. We check the entire opening when we quote a replacement, not just the slab, because a rust bubble on the outside usually means hidden damage underneath.
See the difference
Before
After
Before
After
Before
AfterPricing for Door Installation in Long Beach, CA
Here’s what Long Beach homeowners can expect on a typical written quote: a standard front door replacement runs $1,200 – $1,800 for a slab in a sound jamb. A full prehung door with jamb rebuild on an older home runs $2,000 – $2,800. Storm doors run $850 – $1,400 installed. French door pairs run $1,800 – $3,200. Historic-district front doors with commissioned approval and custom millwork run $2,800 – $4,200. All of these numbers appear in writing before any order goes to the manufacturer.
What shifts the price: the condition of the existing jamb, the hardware you choose, and whether you’re in a historic district that needs commission review. None of it is hidden. None of it changes on the back end. Call (562) 912-3327 for a free estimate, and we’ll explain every line item in person.
A Long Beach-Sized Detail: Marine Air and Historic Approvals
Long Beach’s older neighborhoods were built for a different climate than today’s – yes, the marine layer is the same, but the original door hardware was solid brass and the original jambs were old-growth Douglas fir from northwest forests that don’t exist anymore for logging at that density. When we replace a 1920s front door, we’re often replacing a jamb that has survived ninety years of fog and salt. The replacement has to match the opening, the style, and the moisture load. That’s why we keep reclaimed Douglas fir on hand in Long Beach; new-growth fir from a lumberyard doesn’t have the same rot resistance, and the Cultural Heritage Commission knows the difference when they’re reviewing your block.
On a 1920s Spanish Revival home in Belmont Heights, we recently replaced a rotting front-door jamb with custom-milled Douglas fir, then installed a Therma-Tru fiberglass door with a laminated glass interlayer and stainless steel hinges. The opening was non-standard, so we sized the door to the original jamb width rather than furring the frame out. The Cultural Heritage Commission approved the door before we ordered anything. The homeowner signed off on a written price that did not move. That’s how we work.
For more on how this works across our full range of services, see our Door Installation team page.
We Also Serve Cities Near Long Beach
Lightwell serves Long Beach and the surrounding communities, including Seal Beach, San Pedro, Harbor City, and Los Alamitos. If you’re in one of these areas and you’re wondering about door replacement costs, permits, or marine-air hardware choices, the estimate process is the same: call us, and we’ll bring the written quote to your door. Explore what’s covered on our Door Installation page or reach out directly.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Long Beach
Yes. In designated historic districts, the Cultural Heritage Commission must approve any door alteration visible from the street before the work can begin. We handle the submittal on your behalf, which means drafting the spec, providing photos and manufacturer’s documentation, and coordinating the board’s timeline. The approval process can add several weeks to the project, and the price reflects that time. Call (562) 912-3327 for a free estimate, and we’ll walk through exactly what applies to your block.
We match the jamb profile and the original opening dimensions first, then we choose a door slab that reads correctly: usually a Therm-Tru fiberglass slab with a clear-grain wood-grain finish for 1920s Craftsman homes, or a custom wood door where the commission requires true divided lites. We keep reclaimed old-growth Douglas fir in our Long Beach stock, and our carpenters mill replacement jambs on site to match the original profile rather than buying a standard prehung unit from a big-box supplier. The result looks like it was always there.
Salt from the marine layer condenses on aluminum and eats through the anodized finish within about two seasons. The corrosion starts at the hinge plates and the threshold, then spreads. Aluminum was common in Long Beach mid-century construction, and it’s still used today, but homeowners in Naples and on the Peninsula should specify stainless steel hardware and look at fiberglass or vinyl door slabs if they’re within a mile of the water. We can inspect your existing door and tell you what’s actually failing and what’s worth keeping.
Yes, in most cases. PGT and Mr-Glass both make impact-rated door slabs that can be built to a wood-grain or painted finish that matches the original Spanish Revival appearance. The key is the jamb and hardware: impact-rated doors are heavier, so the existing wood jamb may need reinforcement with stainless steel attachment plates. If your home is in a historic district, we’ll include the impact rating in the submittal to the Cultural Heritage Commission, because the visible hardware has to stay consistent with the era’s style.
Lead time on the door itself, not labor hours. A custom slab from a manufacturer like Mr-Glass or Therma-Tru takes four to eight weeks from order to delivery in Long Beach, depending on the glass package and the finish. If you’re in a historic district, Cultural Heritage Commission approval runs on their calendar, and we submit early to keep from losing a month. Once the slab arrives, installation typically takes one day for a standard replacement and two to three days for a full jamb rebuild. We’ll give you the order date and the install window in writing before anything is charged.
Get a Written Estimate for Door Installation in Long Beach
If you need a front door, a back door, a French pair, or a storm door in Long Beach, we’ll send one of our uniformed, background-checked technicians to measure, check the jamb, and explain what we recommend and why. You’ll get a written price you can hold onto, and it won’t change once the job starts. Call (562) 912-3327 for your free estimate. A real person answers the phone, day or night.
Written by Keith Yamada, Owner at Lightwell Windows Long Beach, serving Long Beach since our founding as part of the Cedarwell network in 2010.
Six Reasons Homeowners Choose Lightwell Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.