ES Windows Window Replacement Nationwide

ES Windows Window Replacement: The Long Beach Owner’s Guide

ES Windows window replacement in Long Beach typically runs between $850 and $1,900 per opening installed, depending on the series, glass package, and how much of the surrounding frame needs rebuilding. We stock ES Windows-compatible sashes, balances, rollers, and hardware, and most replacements are done the same day once we’ve measured and confirmed the match. Owners usually discover they need us when a sash won’t stay up, a corner joint has opened up, or the frame has started letting salt air into a room that used to stay dry.

Call (562) 912-3327

If that sounds like your window, you’re in the right place. We work on ES Windows product across Long Beach, from the bluff-top homes in Belmont Shore down to the older craftsman stock around Wrigley, and we’ve learned exactly where these windows show their age first in our coastal climate.

Which ES Windows Models This Applies To

ES Windows makes a range of aluminum and vinyl product lines, and the replacement path is different for each. The most common units we see in Long Beach are the ES 7000 series aluminum sliders, the ES 9000 series casements and awnings, and the Vinyl 2000 line that went into a lot of mid-1990s remodels. If your window still has its original label, it’s usually etched or stickered on the top edge of the sash or inside the frame channel. Look for a string of numbers starting with “ES” followed by a four-digit series code, then a width and height in inches.

The compatibility gotcha with ES Windows is the balance system: the 7000 series uses a block-and-tackle balance that sits in a channel 1-1/16 inches wide, while the 9000 series uses a heavier coil balance with a narrower 3/4-inch channel. They do not interchange. A tech who doesn’t know ES Windows will sometimes try to force a generic balance in and strip the channel, which turns a $40 part into a whole new sash. We keep both systems in our Long Beach service kit, along with OEM-grade wool pile, corner keys, and cam locks, because we know which one your window takes before we touch it.

One thing worth knowing before you pay for a branded replacement: ES Windows does not sell direct to homeowners, and some “OEM” parts online are unbranded imports with the correct shape but a softer alloy. For anything load-bearing, like a balance or a corner weld, we match the original spec, not just the silhouette.

Signs Your ES Windows Window Replacement Is Failing

• Sash drops or won’t stay open. The balance cartridge has lost tension or the spring has fatigued. On a slider, it usually means a roller assembly has snapped or worn through its housing.
• Corner joint separates or you can see daylight at the seam. The welded or screwed corner has failed, which happens to aluminum frames in Long Beach when years of marine air work into the joint and fatigue the metal.
• Water streaks or mineral deposits inside the glass. The insulated glass unit’s seal has failed. Once the desiccant inside the spacer is saturated, the glass will fog from the inside no matter how clean you keep the outside.
• Lock or latch won’t line up anymore. The frame has shifted or the keep is worn, and that little gap at the lock is enough to make the window rattle in Santa Ana winds and leak conditioned air year-round.
• Window is hard to slide or crank. Rollers, hinges, or pivot bars have worn or the track is packed with salt-and-sand grit, which acts like sandpaper on aluminum surfaces here at the coast.

Replacement Cost & What’s Included

Most ES Windows window replacements in Long Beach run between $850 and $1,900 per opening installed. The spread comes down to three things: which series you have (aluminum 7000/9000 units cost more to work on than vinyl 2000 units), whether we’re rebuilding the existing frame or replacing the whole unit, and whether you stay with original-spec glass or step up to low-E insulated glass, which is worth the cost in Long Beach’s sunny, salty air.

Here is how the price lands on a typical job:

• Full unit replacement, mid-size, installed: $850 – $1,250 per opening
• Full unit replacement, large or custom, aluminum: $1,300 – $1,900 per opening
• Sash-only replacement with new balance and seals: $400 – $700 per opening
• Hardware-only replacement (locks, rollers, hinges): $180 – $450 per opening

Every quote includes the part, labor, haul-away of the old unit, and the written price before any work starts. If the finished install isn’t right, the 365-Day Done Right Promise means we make it right, no debate, no countdown. Keith Yamada reviews every ES Windows quote personally before it reaches you, because he’d rather catch a measurement mistake at the desk than at your sill.

DIY or Call Us?

There are a couple of things an owner can safely check before calling us. You can look at the top edge of the sash for that “ES” label and note the series number and size. You can feel for drafts at the corners on a windy day and slide a piece of paper between the sash and frame to find where the seal has given out. You can clean the track with a vacuum and a damp cloth, avoiding lubricants that attract sand.

But the actual replacement is not a grab-a-screwdriver weekend project. ES Windows are built with tight tolerances, and a balance cartridge is under constant spring tension. If it releases while you’re working, it can take a finger or break the glass. We wear the right gloves, pin the balance, and know the release sequence by heart. If the part is something smaller, like a lock or a roller, we’ll tell you exactly what we’re replacing and why it matched your window. Call (562) 912-3327 and we’ll come take a look. Estimates are free, and the written price you get is the price you pay.

FAQs