Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Impact Garage Doors: The Long Beach Owner’s Guide
If you have an ES Windows impact-rated garage door that needs parts or replacement, we stock ES Windows-compatible hardware and doors for Long Beach homes, with most complete door replacements running between $3,800 and $7,200 installed depending on size, finish, and track configuration. The usual discovery goes like this: a cable frays, a roller starts grinding, or the door hesitates halfway up and you realize the salt air from the Long Beach harbor has been working on the hardware longer than you thought. We’ll match the part to your ES Windows series, give you a written price before any work starts, and have our crew there with shoe covers on and drop cloths down before a tool comes out of the truck.
Key takeaways: We carry ES Windows impact door hardware and complete door systems, we are an independent service provider and not affiliated with ES Windows, and every estimate is free and in writing. Call (562) 912-3327 and a live person answers, day or night.
Which ES Windows Models This Applies To
ES Windows impact garage doors come in a few distinct series, and the part you need depends on which one your home has. The ES Windows HurricaneGuard line uses a reinforced galvanized steel track with double-sealed nylon rollers, while the CoastalView series runs on a lighter aluminum track with corrosion-resistant bearings. One compatibility gotcha we see often in Long Beach: HurricaneGuard rollers are 2-7/8 inches in diameter and will not seat properly in CoastalView tracks, which are cut 1/16 inch narrower. If a handyman or a previous owner swapped in a generic roller, that’s often why the door binds mid-travel.
To identify your door, look for a silver ES Windows label on the inside face of the bottom panel, near the hinge line. The third line on that label has the series code: HG for HurricaneGuard, CV for CoastalView, and EL for the discontinued EnduraLine. The EL series is the one we get the most calls about; ES Windows stopped producing it around 2016, so OEM parts for EnduraLine are scarce. In those cases, we source quality aftermarket equivalents that match the original torque and load ratings, and we always tell you upfront whether you’re getting OEM or an approved equivalent, with the price difference in writing.
Styles & brands we work with
Signs Your ES Windows Impact Garage Doors Is Failing
- Grinding or metal-on-metal noise from the rollers or track. This usually means a roller bearing has worn out and the wheel is sliding instead of rolling. Left alone, it will chew a groove into the track and turn a $40 roller replacement into a $300 track swap.
- Door hesitates or jerks at the same point every cycle. In Long Beach’s coastal air, corrosion builds unevenly on the track’s inside edge. The hesitation is the door hitting that rough patch. A quick cleaning and re-lubrication sometimes fixes it; more often the track has pitted and needs section replacement.
- One cable looks slack while the other is guitar-string tight. This signals a spring problem. Do not touch it. A spring holding that kind of tension can snap and release enough force to cause serious injury. We’ll send a trained technician with the right winding bars and a healthy respect for what’s stored in that coil.
- Visible rust blooms at the bottom panel corners. ES Windows doors are impact-rated, but the bottom seal channel collects moisture from driveway drainage and Long Beach’s marine layer. Once rust starts there, it travels inward. We see this most on homes within two miles of the water in Belmont Shore, Naples, and the Peninsula.
- The door won’t stay sealed against the frame when closed. Impact-rated doors carry a weatherstripping channel designed to compress under specific pressure. When that channel degrades or the hinges loosen, the seal opens. You’ll notice more dust on the garage floor and a higher cooling bill in August.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For complete ES Windows impact garage door replacements in Long Beach, most homeowners spend between $3,800 and $7,200 installed. Here’s how that breaks down:
- Door panel system: $2,100 to $4,400, depending on size, insulation rating, and whether you need a custom paint match for an HOA or historic district requirement
- Track and hardware: $600 to $1,100, including corrosion-resistant fasteners appropriate for salt-air exposure
- Springs, cables, and balance assembly: $350 to $650, sized to the door’s exact weight
- Labor and installation: $750 to $1,050, including haul-away of the old door and hardware
For a single part, like a roller set or cable replacement, you’re typically looking at $95 to $280 installed. The written quote you get from us before any work starts will list every line item separately, so the number at the end matches the number at the beginning. Every installation carries our 365-Day Done Right Promise: if the finished work isn’t right, we make it right, no debate and no countdown.
DIY or Call Us?
There are a few things a homeowner can safely check: whether the photo-eye sensors are clean and aligned, whether the remote battery needs replacing, and whether visible bolts on the track brackets have backed out. Those are worth five minutes with a flashlight and a wrench.
What we do not recommend doing yourself is anything involving the springs, cables, or the bottom bracket plates. Those components are under constant high tension. A cable that slips while you’re working on it can whip fast enough to break bone. A spring that lets go can launch a winding bar through drywall. If those parts are involved, call (562) 912-3327. Our technicians are trained specifically on torsion and extension spring systems for impact-rated doors, and we bring the right tools and the right respect for the stored energy. If it’s a roller, a hinge, or a track alignment issue, we’ll give you an honest answer about whether it’s worth doing yourself or whether our truck stock makes the service call cheaper than a trip to the parts counter.
FAQs
ES Windows impact garage door springs typically last 8 to 12 years in Long Beach, though homes closer to the harbor or within four blocks of the ocean often see a shorter lifespan closer to 7 to 9 years because of salt corrosion. The spring has a finite number of cycles in it, usually 10,000 for a standard ES Windows spring. Most garage doors on Long Beach streets like those in the Wrigley neighborhood average 3 to 4 cycles a day, which works out to roughly that 8-to-12-year range. If your springs are original and the house was built more than a decade ago, start budgeting. Call (562) 912-3327 and we’ll check the spring’s cycle rating and remaining life during a free estimate visit.
Yes, in most cases a failing ES Windows impact garage door can be repaired with a roller, hinge, cable, or spring replacement for under $300, as long as the panels themselves are intact and the track isn’t deeply gouged. Where we draw the line is when the bottom panel has structural rust, the track has been bent by an impact, or the panel-to-panel hinges have wallowed out their screw holes. At that point you’re pouring money into a door that will keep failing. We’ll show you the damage and give you the repair cost and the replacement cost side by side, in writing, and let you decide. Call (562) 912-3327 for an honest assessment.
A complete ES Windows impact garage door replacement takes one day, usually 4 to 6 hours from truck arrival to final clean-up photo. Single-part repairs like rollers, cables, or a spring replacement typically take 45 minutes to an hour and a half. Our crew respects quiet hours, so if you have a child napping after lunch, we’ll sequence the noisier work, like drilling and track removal, around that window. Before we leave, we sweep, we photograph the clean-up, and we walk you through what was done and what to expect in the first week of operation.
Yes, our Long Beach trucks carry ES Windows HurricaneGuard and CoastalView rollers, hinges, cables, weatherstripping, and the spring sets most commonly found on homes across Long Beach, so the most frequent repairs are done in a single visit. For less common parts, like EnduraLine brackets or custom-sized bottom seals, we special-order and usually have them in hand within 3 to 5 business days. We also stock compatible hardware for PGT, CGI, and CWS impact doors when a home has a mixed setup. Call (562) 912-3327 and we’ll check the truck inventory against your model before we schedule the visit.
Written by Keith Yamada, Owner, Lightwell Windows Long Beach at Lightwell Windows Long Beach, serving Long Beach and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows Long Beach
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.